添加钇对 Pt-5Cu 合金组织结构和性能的影响

采用真空电弧熔炼方法制备了Pt-5Cu、Pt-4.9Cu-0.10Y和Pt-0.48Cu-0.20Y合金。利用X射线衍射仪(XRD)、金相显微镜、显微硬度仪及分光光度计等研究了Pt-Cu及Pt-Cu-Y合金的物相组成、显微组织结构、力学性能及反射率。结果表明，钇对Pt-Cu合金的相结构无明显影响，当钇的添加量为0.20%时，Pt-Cu合金的晶粒尺寸显著细化，晶粒的平均尺寸由约150 μm降至约80 μm；细晶强化使Pt-Cu合金的维氏硬度显著增加到165；在可见光波段内，Pt-Cu及Pt-Cu-Y合金的反射率无明显差别。     

High-performance counter electrode based on nitrogen-doped porous carbon nanoribbons for quantum dot-sensitized solar cells

Nitrogen-doped porous carbon nanoribbons (NPCNs) are facilely prepared by carbonization of polypyrrole (PPy) nanotubes followed by a chemical activation process. NPCN counter electrodes are subsequently fabricated by depositing NPCNs onto Ti mesh for quantum dot-sensitized solar cells (QDSCs). Electrochemical tests are carried out to evaluate the electrocatalytic performance of obtained NPCN electrode. The data of electrochemical tests suggest that the NPCN electrode has a superior electrocatalytic ability towards polysulfide (S₂²⁻/S²⁻) electrolyte regeneration reaction and displays a high stability in polysulfide electrolyte. The excellent electrocatalytic performance of NPCN electrode can be ascribed to their large surface area, 2D porous nanoribbon morphology, and nitrogen atom doping, which provides abundant electrocatalytic active sites and facilitates the electrolyte diffusion. Consequently, a power conversion efficiency of 3.27% is obtained by using NPCN electrode as the counter electrode for QDSC. This efficiency is close to the QDSC assembled with commonly used PbS electrode (4.0%).     

Honeycomb-like bio-based carbon framework decorated with ternary tantalum-based compounds as efficient and durable electrocatalysts for triiodide reduction reaction

Finding an inexpensive and effective clean energy electrocatalyst is highly important for the new generation of photovoltaic devices. Herein, we report a facile and universal in situ co-precipitation strategy to load three novel tantalum-based compounds (NiTa₂O₆, MnTa₂O₆, and AlTaO₄) on honeycomb-like bio-based carbon (HBC) frameworks. The HBC framework with unique honeycomb-like network structure serves as a support material in nanohybrids that can provide rich surface active sites and rapid electron transport channels for triiodide reduction reaction. The adoption of widely available and abundant biomass-derived carbon into tantalum-based compounds markedly boosts electrocatalytic properties of nanohybrids and exhibits robust corrosion resistance because nanohybrids adequately utilize the synergistic effects of different components. The photovoltaic devices fabricated with NiTa₂O₆/HBC, MnTa₂O₆/HBC, and AlTaO₄/HBC counter electrode catalysts demonstrate the brilliant power conversion efficiency (PCE) of 7.09%, 7.39%, and 7.86%, respectively, outperforming the Pt-based cells (6.80%). This work offers a strategy for the further rational design of efficient, inexpensive, and durable electrocatalysts for advanced energy technology applications.     

虚拟候车环境内视觉线索目视管理对乘客寻路行为的影响

在虚拟候车环境中,研究视觉线索所提供的信息与乘客视觉信息需求的一致性对其登乘行为的影响,通过调整候车环境中提供寻路信息的两种视觉线索(候车信息屏和车站检票口布局结构)与乘客所需信息的目视统一性,以完成任务的总时间、看屏时间及行动时间等作为乘客寻路表现的指标来评价不同形式的两种视觉线索的功能,为车站目视化管理提供科学依据。实验结果表明:候车信息屏上信息呈现的顺序在与使用者的目视编码需求保持一致时,乘客有较好的寻路表现;与顺序型和奇偶型布局相比,AB型布局能使乘客在较短的时间内形成空间认知,是一种对布局结构进行目视管理的理想类型。     

Synthesis of carbon nanomaterials for dye‐sensitized solar cells

In this paper, it was demonstrated that Na₂O can react with CO to produce carbon nanofibers at 500 °C and carbon nanosheets at 550 °C. Furthermore, the nanosheets exhibited excellent performance as a counter electrode for a dye‐sensitized solar cell (DSSC), leading to a high power conversion efficiency of 7.57%. The efficiency is larger than that (4.72%) of a DSSC with the carbon nanofiber counter electrode and even comparable with that of an expensive Pt‐based DSSC. Copyright © 2015 John Wiley & Sons, Ltd.     

超高效液相色谱-四极杆飞行时间质谱法快速测定混合型饲料添加剂中14种化学药物

目的 建立超高效液相色谱-四极杆飞行时间质谱法快速测定混合型饲料添加剂中培氟沙星、氯霉素、沙丁胺醇、盐酸克伦特罗、氧氟沙星、恩诺沙星、诺氟沙星、氟苯尼考、磺胺嘧啶、磺胺甲噁唑、磺胺间甲氧嘧啶、甲硝唑、多西环素、金刚烷胺共14种化学药物的分析方法。方法 样品经乙腈-水(8:2, V:V)提取, 上清液离心后上样, 以0.1%(V:V)甲酸甲醇溶液和0.1%(V:V)甲酸水溶液为流动相进行梯度洗脱(负离子模式流动相为乙腈-水), C18色谱柱(50 mm×2.1 mm, 1.7 μm)分离。分别采用正/负离子模式检测分析。结果 14种药物的质量数误差绝对值小于5 mDa, 在2.0~100.0 μg/L范围内线性关系良好, 相关系数大于0.99。4个浓度水平的平均回收率为70.6%~119.80%, 相对标准偏差1.0%~12.4%。结论 该方法操作简便、结果准确, 适用于混合型饲料添加剂中非法添加药物的快速筛查分析。     

Electrospun porous Fe2O3 nanotubes as counter electrodes for dye‐sensitized solar cells

Porous Fe₂O₃ nanostructures were synthesized through electrospinning of Fe (NO₃)₃/polyvinylpyrrolidone followed by calcination in air. The morphology of the resultant Fe₂O₃ was tuned by changing the ratio between Fe (NO₃)₃ and the polymer matrix. The performance of these nanostructures as counter electrodes in dye‐sensitized solar cells (DSSCs) was investigated. It was found that nanotubes exhibit significantly higher catalytic efficiency toward reducing I^?/I₃^? electrolytes than nanorods and nanobelts, showing a photoelectric conversion efficiency of 4.0%, also superior to a range of transition metal oxides. Furthermore, the nanotube‐based counter electrode showed lower resistance than other Fe₂O₃ nanostructures. These results were attributed to the high specific surface area (90.2 m² g^?1) of the nanotubes, which provides a large reaction site and can promote the charge transfer at the electrode/electrolyte interfaces. The low cost and ease of mass production make Fe₂O₃ nanotube a promising candidate to replace Pt as the counter electrode in DSSCs.     

Relationship on structure and properties of polyurethane modified Diels–Alder addition polymer

A series of linear and crosslinked polyurethane modified materials were prepared by Diels–Alder cycloaddition reaction. Based on raw materials, some novel equations were designed and effects of equation parameters on the mechanical properties of modified material were explored. It was demonstrated that tensile strength of modified materials and elongation at break were changed from 3.68 to 18.71 MPa, 200 to 866%, respectively. In addition, the optimal reaction temperature of retro-Diels–Alder (r-DA) reaction was determined by differential scanning calorimeter (DSC). Gel permeation chromatography (GPC) and tensile experiments were used to characterize the properties of repolymerized material after degradation. The results indicated the optimal temperature of r-DA for linear and crosslinked polyurethane modified materials is 127 and 150 °C. Moreover, after decomposed, the product was slowly repolymerized at 60 °C, and can more effectively restore material strength under the action of the solvent to achieve self-healing effect. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47355.     

基体稀释或基体匹配石墨炉原子吸收光谱法测定土壤样品中铅和镉

用石墨炉原子吸收光谱法测定土壤样品中Pb和Cd时,有时候直接按照方法标准GB/T 17141—1997操作,测定结果不能满足质控要求。研究结果表明,目标元素系列标准溶液中,分别含和不含土壤基体元素Na、Mg、Al、Si、Fe、Ca等元素混合成分时,校准曲线斜率明显不同。为减小基体效应的影响,基于文献调研和实验结果,对上述方法标准实验步骤进行了下列改进:(1)取相同体积实际样品消解液混合后,定量加入到用于建立校准曲线的系列标准溶液中,用于基体匹配;(2)对消解液进行适度稀释,仍采用标准溶液建立校准曲线。用4个土壤标样和土壤样品加标测定结果对改进后的方法进行了验证,结果表明,基体稀释法测定Pb的回收率范围分别为90.4%~114%;测定低含量Cd时,回收率范围为84.1%~125%。基体匹配法测定Pb和Cd的回收率范围分别为93.0%~105%和102%~119%,基本满足土壤样品中重金属回收率为80%~120%的质控要求。样品中痕量镉在测定下限附近时,应严格控制稀释倍数,或采用基体匹配法测定。改进后的操作步骤适合日常检测工作中大批量土壤样品中Pb和Cd的准确测定。     

隐私保护DNA序列汉明距离计算问题

DNA序列承载着人体重要的生物学信息，如何在保护隐私的情况下正确地对不同的DNA序列进行比对，成为亟待研究的科学问题。汉明距离在一定程度上刻画了两个DNA序列的相似程度，在保护隐私的情况下，研究DNA序列的汉明距离计算问题。首先定义了DNA序列的0-1编码规则，该规则将长度为n的DNA序列编码成长度为4n的0-1串，证明了两个DNA序列的汉明距离等于它们的0-1编码串的汉明距离的一半。以此结论为基础，以GM加密算法为主要密码学工具，构造了计算DNA序列汉明距离的一个安全两方计算协议。在半诚实攻击者模型下，证明了协议的正确性，给出了基于模拟器的安全性证明，并对协议的效率进行了分析。